In asynchronous programming, it's common for one asynchronous operation to invoke a second operation on completion. Continuations allow descendant operations to consume the results of the first operation. Traditionally, continuations have been done by using callback methods. In the Task Parallel Library (TPL), the same functionality is provided by continuation tasks. A continuation task (also known just as a continuation) is an asynchronous task that's invoked by another task, known as the antecedent, when the antecedent finishes.
Continuations are relatively easy to use but are nevertheless powerful and flexible. For example, you can:
- Pass data from the antecedent to the continuation.
- Specify the precise conditions under which the continuation will be invoked or not invoked.
- Cancel a continuation either before it starts or cooperatively as it's running.
- Provide hints about how the continuation should be scheduled.
- Invoke multiple continuations from the same antecedent.
- Invoke one continuation when all or any one of multiple antecedents complete.
- Chain continuations one after another to any arbitrary length.
- Use a continuation to handle exceptions thrown by the antecedent.
About continuations
A continuation is a task that's created in the System.Threading.Tasks.TaskStatus.WaitingForActivation state. It's activated automatically when its antecedent task or tasks complete. Calling System.Threading.Tasks.Task.Start on a continuation in user code throws an System.InvalidOperationException exception.
A continuation is itself a System.Threading.Tasks.Task and doesn't block the thread on which it's started. Call the System.Threading.Tasks.Task.Wait method to block until the continuation task finishes.
Create a continuation for a single antecedent
You create a continuation that executes when its antecedent has completed by calling the System.Threading.Tasks.Task.ContinueWith method. The following example shows the basic pattern (for clarity, exception handling is omitted). It executes an antecedent task taskA that returns a System.DayOfWeek object that indicates the name of the current day of the week. When taskA completes, the antecedent represents its results in the ContinueWith continuation method. The result of the antecedent task is written to the console.
sample · csharpdocs/standard/parallel-programming/snippets/cs/simple1.cs
using System;
using System.Threading.Tasks;
public class SimpleExample
{
public static async Task Main()
{
// Declare, assign, and start the antecedent task.
Task<DayOfWeek> taskA = Task.Run(() => DateTime.Today.DayOfWeek);
// Execute the continuation when the antecedent finishes.
await taskA.ContinueWith(antecedent => Console.WriteLine($"Today is {antecedent.Result}."));
}
}
// The example displays the following output:
// Today is Monday.sample · vbsamples/snippets/visualbasic/VS_Snippets_Misc/tpl_continuations/vb/simple1.vb1
' <Snippet1>
Imports System.Threading.Tasks
Module Example
Public Sub Main()
' Execute the antecedent.
Dim taskA As Task(Of DayOfWeek) = Task.Run(Function() DateTime.Today.DayOfWeek)
' Execute the continuation when the antecedent finishes.
Dim continuation As Task = taskA.ContinueWith(Sub(antecedent)
Console.WriteLine("Today is {0}.", antecedent.Result)
End Sub)
continuation.Wait()
End Sub
End Module
' The example displays output like the following output:
' Today is Monday.
' </Snippet1>Create a continuation for multiple antecedents
You can also create a continuation that will run when any or all of a group of tasks have completed. To execute a continuation when all antecedent tasks have completed, you can call the static (Shared in Visual Basic) System.Threading.Tasks.Task.WhenAll method or the instance System.Threading.Tasks.TaskFactory.ContinueWhenAll method. To execute a continuation when any of the antecedent tasks have completed, you can call the static (Shared in Visual Basic) System.Threading.Tasks.Task.WhenAny method or the instance System.Threading.Tasks.TaskFactory.ContinueWhenAny method.
Calls to the System.Threading.Tasks.Task.WhenAll and System.Threading.Tasks.Task.WhenAny overloads don't block the calling thread. However, you typically call all but the System.Threading.Tasks.Task.WhenAll%28System.Collections.Generic.IEnumerable%7BSystem.Threading.Tasks.Task%7D%29 and System.Threading.Tasks.Task.WhenAll%28System.Threading.Tasks.Task%5B%5D%29 methods to retrieve the returned System.Threading.Tasks.Task.Result property, which does block the calling thread.
The following example calls the System.Threading.Tasks.Task.WhenAll%28System.Collections.Generic.IEnumerable%7BSystem.Threading.Tasks.Task%7D%29 method to create a continuation task that reflects the results of its 10 antecedent tasks. Each antecedent task squares an index value that ranges from one to 10. If the antecedents complete successfully (their System.Threading.Tasks.Task.Status property is System.Threading.Tasks.TaskStatus.RanToCompletion), the System.Threading.Tasks.Task.Result property of the continuation is an array of the System.Threading.Tasks.Task.Result values returned by each antecedent. The example adds them to compute the sum of squares for all numbers between one and 10:
sample · csharpdocs/standard/parallel-programming/snippets/cs/whenall1.cs
using System.Collections.Generic;
using System;
using System.Threading.Tasks;
public class WhenAllExample
{
public static async Task Main()
{
var tasks = new List<Task<int>>();
for (int ctr = 1; ctr <= 10; ctr++)
{
int baseValue = ctr;
tasks.Add(Task.Factory.StartNew(b => (int)b! * (int)b, baseValue));
}
var results = await Task.WhenAll(tasks);
int sum = 0;
for (int ctr = 0; ctr <= results.Length - 1; ctr++)
{
var result = results[ctr];
Console.Write($"{result} {((ctr == results.Length - 1) ? "=" : "+")} ");
sum += result;
}
Console.WriteLine(sum);
}
}
// The example displays the similar output:
// 1 + 4 + 9 + 16 + 25 + 36 + 49 + 64 + 81 + 100 = 385sample · vbsamples/snippets/visualbasic/VS_Snippets_Misc/tpl_continuations/vb/whenall1.vb5
' Visual Basic .NET Document
Option Strict On
' <Snippet5>
Imports System.Collections.Generic
Imports System.Threading.Tasks
Module Example
Public Sub Main()
Dim tasks As New List(Of Task(Of Integer))()
For ctr As Integer = 1 To 10
Dim baseValue As Integer = ctr
tasks.Add(Task.Factory.StartNew(Function(b)
Dim i As Integer = CInt(b)
Return i * i
End Function, baseValue))
Next
Dim continuation = Task.WhenAll(tasks)
Dim sum As Long = 0
For ctr As Integer = 0 To continuation.Result.Length - 1
Console.Write("{0} {1} ", continuation.Result(ctr),
If(ctr = continuation.Result.Length - 1, "=", "+"))
sum += continuation.Result(ctr)
Next
Console.WriteLine(sum)
End Sub
End Module
' The example displays the following output:
' 1 + 4 + 9 + 16 + 25 + 36 + 49 + 64 + 81 + 100 = 385
' </Snippet5>Continuation options
When you create a single-task continuation, you can use a System.Threading.Tasks.Task.ContinueWith overload that takes a System.Threading.Tasks.TaskContinuationOptions enumeration value to specify the conditions under which the continuation starts. For example, you can specify that the continuation is to run only if the antecedent completes successfully, or only if it completes in a faulted state. If the condition isn't true when the antecedent is ready to invoke the continuation, the continuation transitions directly to the System.Threading.Tasks.TaskStatus.Canceled state and can't be started later.
Many multi-task continuation methods, such as overloads of the System.Threading.Tasks.TaskFactory.ContinueWhenAll method, also include a System.Threading.Tasks.TaskContinuationOptions parameter. However, only a subset of all System.Threading.Tasks.TaskContinuationOptions enumeration members is valid. You can specify System.Threading.Tasks.TaskContinuationOptions values that have counterparts in the System.Threading.Tasks.TaskCreationOptions enumeration, such as System.Threading.Tasks.TaskContinuationOptions.AttachedToParent, System.Threading.Tasks.TaskContinuationOptions.LongRunning, and System.Threading.Tasks.TaskContinuationOptions.PreferFairness. If you specify any of the NotOn or OnlyOn options with a multi-task continuation, an System.ArgumentOutOfRangeException exception will be thrown at runtime.
For more information on task continuation options, see the System.Threading.Tasks.TaskContinuationOptions article.
Pass data to a continuation
The System.Threading.Tasks.Task.ContinueWith method passes a reference to the antecedent as an argument to the user delegate of the continuation. If the antecedent is a System.Threading.Tasks.Task object, and the task ran until it was completed, then the continuation can access the System.Threading.Tasks.Task.Result property of the task.
The System.Threading.Tasks.Task.Result property blocks until the task has completed. However, if the task was canceled or faulted, attempting to access the System.Threading.Tasks.Task.Result property throws an System.AggregateException exception. You can avoid this problem by using the System.Threading.Tasks.TaskContinuationOptions.OnlyOnRanToCompletion option, as shown in the following example:
sample · csharpdocs/standard/parallel-programming/snippets/cs/result1.cs
using System;
using System.Threading.Tasks;
public class ResultExample
{
public static async Task Main()
{
var task = Task.Run(
() =>
{
DateTime date = DateTime.Now;
return date.Hour > 17
? "evening"
: date.Hour > 12
? "afternoon"
: "morning";
});
await task.ContinueWith(
antecedent =>
{
Console.WriteLine($"Good {antecedent.Result}!");
Console.WriteLine($"And how are you this fine {antecedent.Result}?");
}, TaskContinuationOptions.OnlyOnRanToCompletion);
}
}
// The example displays the similar output:
// Good afternoon!
// And how are you this fine afternoon?sample · vbsamples/snippets/visualbasic/VS_Snippets_Misc/tpl_continuations/vb/result1.vb2
' Visual Basic .NET Document
Option Strict On
' <Snippet2>
Imports System.Threading.Tasks
Module Example
Public Sub Main()
Dim t = Task.Run(Function()
Dim dat As DateTime = DateTime.Now
If dat = DateTime.MinValue Then
Throw New ArgumentException("The clock is not working.")
End If
If dat.Hour > 17 Then
Return "evening"
Else If dat.Hour > 12 Then
Return "afternoon"
Else
Return "morning"
End If
End Function)
Dim c = t.ContinueWith(Sub(antecedent)
Console.WriteLine("Good {0}!",
antecedent.Result)
Console.WriteLine("And how are you this fine {0}?",
antecedent.Result)
End Sub, TaskContinuationOptions.OnlyOnRanToCompletion)
c.Wait()
End Sub
End Module
' The example displays output like the following:
' Good afternoon!
' And how are you this fine afternoon?
' </Snippet2>If you want the continuation to run even if the antecedent didn't run to successful completion, you must guard against the exception. One approach is to test the System.Threading.Tasks.Task.Status property of the antecedent, and only attempt to access the System.Threading.Tasks.Task.Result property if the status isn't System.Threading.Tasks.TaskStatus.Faulted or System.Threading.Tasks.TaskStatus.Canceled. You can also examine the System.Threading.Tasks.Task.Exception property of the antecedent. For more information, see Exception Handling. The following example modifies the preceding example to access antecedent's System.Threading.Tasks.Task.Result property only if its status is System.Threading.Tasks.TaskStatus.RanToCompletion:
sample · csharpdocs/standard/parallel-programming/snippets/cs/result2.cs
using System;
using System.Threading.Tasks;
public class ResultTwoExample
{
public static async Task Main() =>
await Task.Run(
() =>
{
DateTime date = DateTime.Now;
return date.Hour > 17
? "evening"
: date.Hour > 12
? "afternoon"
: "morning";
})
.ContinueWith(
antecedent =>
{
if (antecedent.Status == TaskStatus.RanToCompletion)
{
Console.WriteLine($"Good {antecedent.Result}!");
Console.WriteLine($"And how are you this fine {antecedent.Result}?");
}
else if (antecedent.Status == TaskStatus.Faulted)
{
Console.WriteLine(antecedent.Exception!.GetBaseException().Message);
}
});
}
// The example displays output like the following:
// Good afternoon!
// And how are you this fine afternoon?sample · vbsamples/snippets/visualbasic/VS_Snippets_Misc/tpl_continuations/vb/result2.vb7
' Visual Basic .NET Document
Option Strict On
' <Snippet7>
Imports System.Threading.Tasks
Module Example
Public Sub Main()
Dim t = Task.Run(Function()
Dim dat As DateTime = DateTime.Now
If dat = DateTime.MinValue Then
Throw New ArgumentException("The clock is not working.")
End If
If dat.Hour > 17 Then
Return "evening"
Else If dat.Hour > 12 Then
Return "afternoon"
Else
Return "morning"
End If
End Function)
Dim c = t.ContinueWith(Sub(antecedent)
If t.Status = TaskStatus.RanToCompletion Then
Console.WriteLine("Good {0}!",
antecedent.Result)
Console.WriteLine("And how are you this fine {0}?",
antecedent.Result)
Else If t.Status = TaskStatus.Faulted Then
Console.WriteLine(t.Exception.GetBaseException().Message)
End If
End Sub)
End Sub
End Module
' The example displays output like the following:
' Good afternoon!
' And how are you this fine afternoon?
' </Snippet7>Cancel a continuation
The System.Threading.Tasks.Task.Status property of a continuation is set to System.Threading.Tasks.TaskStatus.Canceled in the following situations:
It throws an System.OperationCanceledException exception in response to a cancellation request. As with any task, if the exception contains the same token that was passed to the continuation, it's treated as an acknowledgment of cooperative cancellation.
The continuation is passed a System.Threading.CancellationToken whose System.Threading.CancellationToken.IsCancellationRequested property is
true. In this case, the continuation doesn't start, and it transitions to the System.Threading.Tasks.TaskStatus.Canceled state.The continuation never runs because the condition set by its System.Threading.Tasks.TaskContinuationOptions argument wasn't met. For example, if an antecedent goes into a System.Threading.Tasks.TaskStatus.Faulted state, its continuation that was passed the System.Threading.Tasks.TaskContinuationOptions.NotOnFaulted option won't run but will transition to the System.Threading.Tasks.TaskStatus.Canceled state.
If a task and its continuation represent two parts of the same logical operation, you can pass the same cancellation token to both tasks, as shown in the following example. It consists of an antecedent that generates a list of integers that are divisible by 33, which it passes to the continuation. The continuation in turn displays the list. Both the antecedent and the continuation pause regularly for random intervals. In addition, a System.Threading.Timer object is used to execute the Elapsed method after a five-second timeout interval. This example calls the System.Threading.CancellationTokenSource.Cancel method, which causes the currently executing task to call the System.Threading.CancellationToken.ThrowIfCancellationRequested method. Whether the System.Threading.CancellationTokenSource.Cancel method is called when the antecedent or its continuation is executing depends on the duration of the randomly generated pauses. If the antecedent is canceled, the continuation won't start. If the antecedent isn't canceled, the token can still be used to cancel the continuation.
sample · csharpdocs/standard/parallel-programming/snippets/cs/cancellation1.cs
using System;
using System.Collections.Generic;
using System.Linq;
using System.Threading;
using System.Threading.Tasks;
public class CancellationExample
{
static readonly Random s_random = new Random((int)DateTime.Now.Ticks);
public static async Task Main()
{
using var cts = new CancellationTokenSource();
CancellationToken token = cts.Token;
var timer = new Timer(Elapsed, cts, 5000, Timeout.Infinite);
var task = Task.Run(
async () =>
{
var product33 = new List<int>();
for (int index = 1; index < short.MaxValue; index++)
{
if (token.IsCancellationRequested)
{
Console.WriteLine("\nCancellation requested in antecedent...\n");
token.ThrowIfCancellationRequested();
}
if (index % 2000 == 0)
{
int delay = s_random.Next(16, 501);
await Task.Delay(delay);
}
if (index % 33 == 0)
{
product33.Add(index);
}
}
return product33.ToArray();
}, token);
Task<double> continuation = task.ContinueWith(
async antecedent =>
{
Console.WriteLine("Multiples of 33:\n");
int[] array = antecedent.Result;
for (int index = 0; index < array.Length; index++)
{
if (token.IsCancellationRequested)
{
Console.WriteLine("\nCancellation requested in continuation...\n");
token.ThrowIfCancellationRequested();
}
if (index % 100 == 0)
{
int delay = s_random.Next(16, 251);
await Task.Delay(delay);
}
Console.Write($"{array[index]:N0}{(index != array.Length - 1 ? ", " : "")}");
if (Console.CursorLeft >= 74)
{
Console.WriteLine();
}
}
Console.WriteLine();
return array.Average();
}, token).Unwrap();
try
{
await task;
double result = await continuation;
}
catch (Exception ex)
{
Console.WriteLine(ex.Message);
}
Console.WriteLine($"\nAntecedent Status: {task.Status}");
Console.WriteLine($"Continuation Status: {continuation.Status}");
}
static void Elapsed(object? state)
{
if (state is CancellationTokenSource cts)
{
cts.Cancel();
Console.WriteLine("\nCancellation request issued...\n");
}
}
}
// The example displays the similar output:
// Multiples of 33:
//
// 33, 66, 99, 132, 165, 198, 231, 264, 297, 330, 363, 396, 429, 462, 495, 528,
// 561, 594, 627, 660, 693, 726, 759, 792, 825, 858, 891, 924, 957, 990, 1,023,
// 1,056, 1,089, 1,122, 1,155, 1,188, 1,221, 1,254, 1,287, 1,320, 1,353, 1,386,
// 1,419, 1,452, 1,485, 1,518, 1,551, 1,584, 1,617, 1,650, 1,683, 1,716, 1,749,
// 1,782, 1,815, 1,848, 1,881, 1,914, 1,947, 1,980, 2,013, 2,046, 2,079, 2,112,
// 2,145, 2,178, 2,211, 2,244, 2,277, 2,310, 2,343, 2,376, 2,409, 2,442, 2,475,
// 2,508, 2,541, 2,574, 2,607, 2,640, 2,673, 2,706, 2,739, 2,772, 2,805, 2,838,
// 2,871, 2,904, 2,937, 2,970, 3,003, 3,036, 3,069, 3,102, 3,135, 3,168, 3,201,
// 3,234, 3,267, 3,300, 3,333, 3,366, 3,399, 3,432, 3,465, 3,498, 3,531, 3,564,
// 3,597, 3,630, 3,663, 3,696, 3,729, 3,762, 3,795, 3,828, 3,861, 3,894, 3,927,
// 3,960, 3,993, 4,026, 4,059, 4,092, 4,125, 4,158, 4,191, 4,224, 4,257, 4,290,
// 4,323, 4,356, 4,389, 4,422, 4,455, 4,488, 4,521, 4,554, 4,587, 4,620, 4,653,
// 4,686, 4,719, 4,752, 4,785, 4,818, 4,851, 4,884, 4,917, 4,950, 4,983, 5,016,
// 5,049, 5,082, 5,115, 5,148, 5,181, 5,214, 5,247, 5,280, 5,313, 5,346, 5,379,
// 5,412, 5,445, 5,478, 5,511, 5,544, 5,577, 5,610, 5,643, 5,676, 5,709, 5,742,
// Cancellation request issued...
//
// 5,775,
// Cancellation requested in continuation...
//
// The operation was canceled.
//
// Antecedent Status: RanToCompletion
// Continuation Status: Canceledsample · vbsamples/snippets/visualbasic/VS_Snippets_Misc/tpl_continuations/vb/cancellation1.vb3
' Visual Basic .NET Document
Option Strict On
Option Infer On
' <Snippet3>
Imports System.Collections.Generic
Imports System.Threading
Imports System.Threading.Tasks
Module Example
Public Sub Main()
Dim rnd As New Random()
Dim lockObj As New Object()
Dim cts As New CancellationTokenSource()
Dim token As CancellationToken = cts.Token
Dim timer As New Timer(AddressOf Elapsed, cts, 5000, Timeout.Infinite)
Dim t = Task.Run(Function()
Dim product33 As New List(Of Integer)()
For ctr As Integer = 1 To Int16.MaxValue
' Check for cancellation.
If token.IsCancellationRequested Then
Console.WriteLine("\nCancellation requested in antecedent...\n")
token.ThrowIfCancellationRequested()
End If
' Introduce a delay.
If ctr Mod 2000 = 0 Then
Dim delay As Integer
SyncLock lockObj
delay = rnd.Next(16, 501)
End SyncLock
Thread.Sleep(delay)
End If
' Determine if this is a multiple of 33.
If ctr Mod 33 = 0 Then product33.Add(ctr)
Next
Return product33.ToArray()
End Function, token)
Dim continuation = t.ContinueWith(Sub(antecedent)
Console.WriteLine("Multiples of 33:" + vbCrLf)
Dim arr = antecedent.Result
For ctr As Integer = 0 To arr.Length - 1
If token.IsCancellationRequested Then
Console.WriteLine("{0}Cancellation requested in continuation...{0}",
vbCrLf)
token.ThrowIfCancellationRequested()
End If
If ctr Mod 100 = 0 Then
Dim delay As Integer
SyncLock lockObj
delay = rnd.Next(16, 251)
End SyncLock
Thread.Sleep(delay)
End If
Console.Write("{0:N0}{1}", arr(ctr),
If(ctr <> arr.Length - 1, ", ", ""))
If Console.CursorLeft >= 74 Then Console.WriteLine()
Next
Console.WriteLine()
End Sub, token)
Try
continuation.Wait()
Catch e As AggregateException
For Each ie In e.InnerExceptions
Console.WriteLine("{0}: {1}", ie.GetType().Name,
ie.Message)
Next
Finally
cts.Dispose()
End Try
Console.WriteLine(vbCrLf + "Antecedent Status: {0}", t.Status)
Console.WriteLine("Continuation Status: {0}", continuation.Status)
End Sub
Private Sub Elapsed(state As Object)
Dim cts As CancellationTokenSource = TryCast(state, CancellationTokenSource)
If cts Is Nothing Then return
cts.Cancel()
Console.WriteLine("{0}Cancellation request issued...{0}", vbCrLf)
End Sub
End Module
' The example displays output like the following:
' Multiples of 33:
'
' 33, 66, 99, 132, 165, 198, 231, 264, 297, 330, 363, 396, 429, 462, 495, 528,
' 561, 594, 627, 660, 693, 726, 759, 792, 825, 858, 891, 924, 957, 990, 1,023,
' 1,056, 1,089, 1,122, 1,155, 1,188, 1,221, 1,254, 1,287, 1,320, 1,353, 1,386,
' 1,419, 1,452, 1,485, 1,518, 1,551, 1,584, 1,617, 1,650, 1,683, 1,716, 1,749,
' 1,782, 1,815, 1,848, 1,881, 1,914, 1,947, 1,980, 2,013, 2,046, 2,079, 2,112,
' 2,145, 2,178, 2,211, 2,244, 2,277, 2,310, 2,343, 2,376, 2,409, 2,442, 2,475,
' 2,508, 2,541, 2,574, 2,607, 2,640, 2,673, 2,706, 2,739, 2,772, 2,805, 2,838,
' 2,871, 2,904, 2,937, 2,970, 3,003, 3,036, 3,069, 3,102, 3,135, 3,168, 3,201,
' 3,234, 3,267, 3,300, 3,333, 3,366, 3,399, 3,432, 3,465, 3,498, 3,531, 3,564,
' 3,597, 3,630, 3,663, 3,696, 3,729, 3,762, 3,795, 3,828, 3,861, 3,894, 3,927,
' 3,960, 3,993, 4,026, 4,059, 4,092, 4,125, 4,158, 4,191, 4,224, 4,257, 4,290,
' 4,323, 4,356, 4,389, 4,422, 4,455, 4,488, 4,521, 4,554, 4,587, 4,620, 4,653,
' 4,686, 4,719, 4,752, 4,785, 4,818, 4,851, 4,884, 4,917, 4,950, 4,983, 5,016,
' 5,049, 5,082, 5,115, 5,148, 5,181, 5,214, 5,247, 5,280, 5,313, 5,346, 5,379,
' 5,412, 5,445, 5,478, 5,511, 5,544, 5,577, 5,610, 5,643, 5,676, 5,709, 5,742,
' 5,775, 5,808, 5,841, 5,874, 5,907, 5,940, 5,973, 6,006, 6,039, 6,072, 6,105,
' 6,138, 6,171, 6,204, 6,237, 6,270, 6,303, 6,336, 6,369, 6,402, 6,435, 6,468,
' 6,501, 6,534, 6,567, 6,600, 6,633, 6,666, 6,699, 6,732, 6,765, 6,798, 6,831,
' 6,864, 6,897, 6,930, 6,963, 6,996, 7,029, 7,062, 7,095, 7,128, 7,161, 7,194,
' 7,227, 7,260, 7,293, 7,326, 7,359, 7,392, 7,425, 7,458, 7,491, 7,524, 7,557,
' 7,590, 7,623, 7,656, 7,689, 7,722, 7,755, 7,788, 7,821, 7,854, 7,887, 7,920,
' 7,953, 7,986, 8,019, 8,052, 8,085, 8,118, 8,151, 8,184, 8,217, 8,250, 8,283,
' 8,316, 8,349, 8,382, 8,415, 8,448, 8,481, 8,514, 8,547, 8,580, 8,613, 8,646,
' 8,679, 8,712, 8,745, 8,778, 8,811, 8,844, 8,877, 8,910, 8,943, 8,976, 9,009,
' 9,042, 9,075, 9,108, 9,141, 9,174, 9,207, 9,240, 9,273, 9,306, 9,339, 9,372,
' 9,405, 9,438, 9,471, 9,504, 9,537, 9,570, 9,603, 9,636, 9,669, 9,702, 9,735,
' 9,768, 9,801, 9,834, 9,867, 9,900, 9,933, 9,966, 9,999, 10,032, 10,065, 10,098,
' 10,131, 10,164, 10,197, 10,230, 10,263, 10,296, 10,329, 10,362, 10,395, 10,428,
' 10,461, 10,494, 10,527, 10,560, 10,593, 10,626, 10,659, 10,692, 10,725, 10,758,
' 10,791, 10,824, 10,857, 10,890, 10,923, 10,956, 10,989, 11,022, 11,055, 11,088,
' 11,121, 11,154, 11,187, 11,220, 11,253, 11,286, 11,319, 11,352, 11,385, 11,418,
' 11,451, 11,484, 11,517, 11,550, 11,583, 11,616, 11,649, 11,682, 11,715, 11,748,
' 11,781, 11,814, 11,847, 11,880, 11,913, 11,946, 11,979, 12,012, 12,045, 12,078,
' 12,111, 12,144, 12,177, 12,210, 12,243, 12,276, 12,309, 12,342, 12,375, 12,408,
' 12,441, 12,474, 12,507, 12,540, 12,573, 12,606, 12,639, 12,672, 12,705, 12,738,
' 12,771, 12,804, 12,837, 12,870, 12,903, 12,936, 12,969, 13,002, 13,035, 13,068,
' 13,101, 13,134, 13,167, 13,200, 13,233, 13,266,
' Cancellation requested in continuation...
'
'
' Cancellation request issued...
'
' TaskCanceledException: A task was canceled.
'
' Antecedent Status: RanToCompletion
' Continuation Status: Canceled
' </Snippet3>You can also prevent a continuation from executing if its antecedent is canceled without providing the continuation a cancellation token. Provide the token by specifying the System.Threading.Tasks.TaskContinuationOptions.NotOnCanceled option when you create the continuation, as shown in the following example:
sample · csharpdocs/standard/parallel-programming/snippets/cs/cancellation2.cs
using System;
using System.Threading;
using System.Threading.Tasks;
public class CancellationTwoExample
{
public static async Task Main()
{
using var cts = new CancellationTokenSource();
CancellationToken token = cts.Token;
cts.Cancel();
var task = Task.FromCanceled(token);
Task continuation =
task.ContinueWith(
antecedent => Console.WriteLine("The continuation is running."),
TaskContinuationOptions.NotOnCanceled);
try
{
await task;
}
catch (Exception ex)
{
Console.WriteLine($"{ex.GetType().Name}: {ex.Message}");
Console.WriteLine();
}
Console.WriteLine($"Task {task.Id}: {task.Status:G}");
Console.WriteLine($"Task {continuation.Id}: {continuation.Status:G}");
}
}
// The example displays the similar output:
// TaskCanceledException: A task was canceled.
//
// Task 1: Canceled
// Task 2: Canceledsample · vbsamples/snippets/visualbasic/VS_Snippets_Misc/tpl_continuations/vb/cancellation2.vb8
' Visual Basic .NET Document
'Option Strict On
' <Snippet8>
Imports System.Threading
Imports System.Threading.Tasks
Module Example
Public Sub Main()
Dim cts As New CancellationTokenSource()
Dim token As CancellationToken = cts.Token
cts.Cancel()
Dim t As Task = Task.FromCanceled(token)
Dim continuation As Task = t.ContinueWith(Sub(antecedent)
Console.WriteLine("The continuation is running.")
End Sub, TaskContinuationOptions.NotOnCanceled)
Try
t.Wait()
Catch e As AggregateException
For Each ie In e.InnerExceptions
Console.WriteLine("{0}: {1}", ie.GetType().Name, ie.Message)
Next
Console.WriteLine()
Finally
cts.Dispose()
End Try
Console.WriteLine("Task {0}: {1:G}", t.Id, t.Status)
Console.WriteLine("Task {0}: {1:G}", continuation.Id,
continuation.Status)
End Sub
End Module
' The example displays the following output:
' TaskCanceledException: A task was canceled.
'
' Task 1: Canceled
' Task 2: Canceled
' </Snippet8>After a continuation goes into the System.Threading.Tasks.TaskStatus.Canceled state, it might affect continuations that follow, depending on the System.Threading.Tasks.TaskContinuationOptions that were specified for those continuations.
Continuations that are disposed won't start.
Continuations and child tasks
A continuation doesn't run until the antecedent and all of its attached child tasks have completed. A continuation doesn't wait for detached child tasks to finish. The following two examples illustrate child tasks that are attached to and detached from an antecedent that creates a continuation. In the following example, the continuation runs only after all child tasks have completed, and multiple runs of the example produces identical output each time. The example launches the antecedent by calling the System.Threading.Tasks.TaskFactory.StartNew method because by default the System.Threading.Tasks.Task.Run method creates a parent task whose default task creation option is System.Threading.Tasks.TaskCreationOptions.DenyChildAttach.
sample · csharpdocs/standard/parallel-programming/snippets/cs/attached1.cs
using System;
using System.Threading.Tasks;
public class AttachedExample
{
public static async Task Main()
{
await Task.Factory
.StartNew(
() =>
{
Console.WriteLine($"Running antecedent task {Task.CurrentId}...");
Console.WriteLine("Launching attached child tasks...");
for (int ctr = 1; ctr <= 5; ctr++)
{
int index = ctr;
Task.Factory.StartNew(async value =>
{
Console.WriteLine($" Attached child task #{value} running");
await Task.Delay(1000);
}, index, TaskCreationOptions.AttachedToParent);
}
Console.WriteLine("Finished launching attached child tasks...");
}).ContinueWith(
antecedent =>
Console.WriteLine($"Executing continuation of Task {antecedent.Id}"));
}
}
// The example displays the similar output:
// Running antecedent task 1...
// Launching attached child tasks...
// Finished launching attached child tasks...
// Attached child task #1 running
// Attached child task #5 running
// Attached child task #3 running
// Attached child task #2 running
// Attached child task #4 running
// Executing continuation of Task 1sample · vbsamples/snippets/visualbasic/VS_Snippets_Misc/tpl_continuations/vb/attached1.vb9
' Visual Basic .NET Document
Option Strict On
Option Infer On
' <Snippet9>
Imports System.Threading
Imports System.Threading.Tasks
Public Module Example
Public Sub Main()
Dim t = Task.Factory.StartNew(Sub()
Console.WriteLine("Running antecedent task {0}...",
Task.CurrentId)
Console.WriteLine("Launching attached child tasks...")
For ctr As Integer = 1 To 5
Dim index As Integer = ctr
Task.Factory.StartNew(Sub(value)
Console.WriteLine(" Attached child task #{0} running",
value)
Thread.Sleep(1000)
End Sub, index, TaskCreationOptions.AttachedToParent)
Next
Console.WriteLine("Finished launching attached child tasks...")
End Sub)
Dim continuation = t.ContinueWith(Sub(antecedent)
Console.WriteLine("Executing continuation of Task {0}",
antecedent.Id)
End Sub)
continuation.Wait()
End Sub
End Module
' The example displays the following output:
' Running antecedent task 1...
' Launching attached child tasks...
' Finished launching attached child tasks...
' Attached child task #5 running
' Attached child task #1 running
' Attached child task #2 running
' Attached child task #3 running
' Attached child task #4 running
' Executing continuation of Task 1
' </Snippet9>If child tasks are detached from the antecedent, however, the continuation runs as soon as the antecedent has terminated, regardless of the state of the child tasks. As a result, multiple runs of the following example can produce variable output that depends on how the task scheduler handled each child task:
sample · csharpdocs/standard/parallel-programming/snippets/cs/detached1.cs
using System;
using System.Threading.Tasks;
public class DetachedExample
{
public static async Task Main()
{
Task task =
Task.Factory.StartNew(
() =>
{
Console.WriteLine($"Running antecedent task {Task.CurrentId}...");
Console.WriteLine("Launching attached child tasks...");
for (int ctr = 1; ctr <= 5; ctr++)
{
int index = ctr;
Task.Factory.StartNew(
async value =>
{
Console.WriteLine($" Attached child task #{value} running");
await Task.Delay(1000);
}, index);
}
Console.WriteLine("Finished launching detached child tasks...");
}, TaskCreationOptions.DenyChildAttach);
Task continuation =
task.ContinueWith(
antecedent =>
Console.WriteLine($"Executing continuation of Task {antecedent.Id}"));
await continuation;
Console.ReadLine();
}
}
// The example displays the similar output:
// Running antecedent task 1...
// Launching attached child tasks...
// Finished launching detached child tasks...
// Executing continuation of Task 1
// Attached child task #1 running
// Attached child task #5 running
// Attached child task #2 running
// Attached child task #3 running
// Attached child task #4 runningsample · vbsamples/snippets/visualbasic/VS_Snippets_Misc/tpl_continuations/vb/detached1.vb10
' Visual Basic .NET Document
Option Strict On
Option Infer On
' <Snippet10>
Imports System.Threading
Imports System.Threading.Tasks
Public Module Example
Public Sub Main()
Dim t = Task.Factory.StartNew(Sub()
Console.WriteLine("Running antecedent task {0}...",
Task.CurrentId)
Console.WriteLine("Launching attached child tasks...")
For ctr As Integer = 1 To 5
Dim index As Integer = ctr
Task.Factory.StartNew(Sub(value)
Console.WriteLine(" Attached child task #{0} running",
value)
Thread.Sleep(1000)
End Sub, index)
Next
Console.WriteLine("Finished launching detached child tasks...")
End Sub, TaskCreationOptions.DenyChildAttach)
Dim continuation = t.ContinueWith(Sub(antecedent)
Console.WriteLine("Executing continuation of Task {0}",
antecedent.Id)
End Sub)
continuation.Wait()
End Sub
End Module
' The example displays output like the following:
' Running antecedent task 1...
' Launching attached child tasks...
' Finished launching detached child tasks...
' Attached child task #1 running
' Attached child task #2 running
' Attached child task #5 running
' Attached child task #3 running
' Executing continuation of Task 1
' Attached child task #4 running
' </Snippet10>The final status of the antecedent task depends on the final status of any attached child tasks. The status of detached child tasks doesn't affect the parent. For more information, see Attached and Detached Child Tasks.
Associate state with continuations
You can associate arbitrary state with a task continuation. The System.Threading.Tasks.Task.ContinueWith method provides overloaded versions that each take an System.Object value that represents the state of the continuation. You can later access this state object by using the System.Threading.Tasks.Task.AsyncState property. This state object is null if you don't provide a value.
Continuation state is useful when you convert existing code that uses the Asynchronous Programming Model (APM) to use the TPL. In the APM, you can provide object state in the BeginMethod method and later you can use the System.IAsyncResult.AsyncState property to access that state. To preserve this state when you convert a code that uses the APM to use the TPL, you use the System.Threading.Tasks.Task.ContinueWith method.
Continuation state can also be useful when you work with System.Threading.Tasks.Task objects in the Visual Studio debugger. For example, in the Parallel Tasks window, the Task column displays the string representation of the state object for each task. For more information about the Parallel Tasks window, see Using the Tasks Window.
The following example shows how to use continuation state. It creates a chain of continuation tasks. Each task provides the current time, a System.DateTime object, for the state parameter of the System.Threading.Tasks.Task.ContinueWith method. Each System.DateTime object represents the time at which the continuation task is created. Each task produces as its result a second System.DateTime object that represents the time at which the task finishes. After all tasks finish, this example displays the creation time and the time at which each continuation task finishes.
sample · csharpdocs/standard/parallel-programming/snippets/cs/continuationstate.cs
using System;
using System.Collections.Generic;
using System.Threading;
using System.Threading.Tasks;
class ContinuationStateExample
{
static DateTime DoWork()
{
Thread.Sleep(2000);
return DateTime.Now;
}
static async Task Main()
{
Task<DateTime> task = Task.Run(() => DoWork());
var continuations = new List<Task<DateTime>>();
for (int i = 0; i < 5; i++)
{
task = task.ContinueWith((antecedent, _) => DoWork(), DateTime.Now);
continuations.Add(task);
}
await task;
foreach (Task<DateTime> continuation in continuations)
{
DateTime start = (DateTime)continuation.AsyncState!;
DateTime end = continuation.Result;
Console.WriteLine($"Task was created at {start.TimeOfDay} and finished at {end.TimeOfDay}.");
}
Console.ReadLine();
}
}
// The example displays the similar output:
// Task was created at 10:56:21.1561762 and finished at 10:56:25.1672062.
// Task was created at 10:56:21.1610677 and finished at 10:56:27.1707646.
// Task was created at 10:56:21.1610677 and finished at 10:56:29.1743230.
// Task was created at 10:56:21.1610677 and finished at 10:56:31.1779883.
// Task was created at 10:56:21.1610677 and finished at 10:56:33.1837083.sample · vbsamples/snippets/visualbasic/VS_Snippets_Misc/tpl_continuationstate/vb/continuationstate.vb1
' <snippet1>
Imports System.Collections.Generic
Imports System.Threading
Imports System.Threading.Tasks
' Demonstrates how to associate state with task continuations.
Public Module ContinuationState
' Simulates a lengthy operation and returns the time at which
' the operation completed.
Public Function DoWork() As Date
' Simulate work by suspending the current thread
' for two seconds.
Thread.Sleep(2000)
' Return the current time.
Return Date.Now
End Function
Public Sub Main()
' Start a root task that performs work.
Dim t As Task(Of Date) = Task(Of Date).Run(Function() DoWork())
' Create a chain of continuation tasks, where each task is
' followed by another task that performs work.
Dim continuations As New List(Of Task(Of DateTime))()
For i As Integer = 0 To 4
' Provide the current time as the state of the continuation.
t = t.ContinueWith(Function(antecedent, state) DoWork(), DateTime.Now)
continuations.Add(t)
Next
' Wait for the last task in the chain to complete.
t.Wait()
' Display the creation time of each continuation (the state object)
' and the completion time (the result of that task) to the console.
For Each continuation In continuations
Dim start As DateTime = CDate(continuation.AsyncState)
Dim [end] As DateTime = continuation.Result
Console.WriteLine("Task was created at {0} and finished at {1}.",
start.TimeOfDay, [end].TimeOfDay)
Next
End Sub
End Module
' The example displays output like the following:
' Task was created at 10:56:21.1561762 and finished at 10:56:25.1672062.
' Task was created at 10:56:21.1610677 and finished at 10:56:27.1707646.
' Task was created at 10:56:21.1610677 and finished at 10:56:29.1743230.
' Task was created at 10:56:21.1610677 and finished at 10:56:31.1779883.
' Task was created at 10:56:21.1610677 and finished at 10:56:33.1837083.
' </snippet1>Continuations that return Task types
Sometimes you might need to chain a continuation that returns a System.Threading.Tasks.Task type. These tasks are referred as nested tasks. When a parent task calls System.Threading.Tasks.Task.ContinueWith and provides a continuationFunction that's task-returning, you can call System.Threading.Tasks.TaskExtensions.Unwrap to create a proxy task that represents the asynchronous operation of the <Task<Task<T>>> or Task(Of Task(Of T)) (Visual Basic).
The following example shows how to use continuations that wrap additional task returning functions. Each continuation can be unwrapped, exposing the inner task that was wrapped.
sample · csharpdocs/standard/parallel-programming/snippets/cs/unwrap.cs
using System;
using System.Threading;
using System.Threading.Tasks;
public class UnwrapExample
{
public static async Task Main()
{
Task<int> taskOne = RemoteIncrement(0);
Console.WriteLine("Started RemoteIncrement(0)");
Task<int> taskTwo = RemoteIncrement(4)
.ContinueWith(t => RemoteIncrement(t.Result))
.Unwrap().ContinueWith(t => RemoteIncrement(t.Result))
.Unwrap().ContinueWith(t => RemoteIncrement(t.Result))
.Unwrap();
Console.WriteLine("Started RemoteIncrement(...(RemoteIncrement(RemoteIncrement(4))...)");
try
{
await taskOne;
Console.WriteLine("Finished RemoteIncrement(0)");
await taskTwo;
Console.WriteLine("Finished RemoteIncrement(...(RemoteIncrement(RemoteIncrement(4))...)");
}
catch (Exception e)
{
Console.WriteLine($"A task has thrown the following (unexpected) exception:\n{e}");
}
}
static Task<int> RemoteIncrement(int number) =>
Task<int>.Factory.StartNew(
obj =>
{
Thread.Sleep(1000);
int x = (int)(obj!);
Console.WriteLine("Thread={0}, Next={1}", Thread.CurrentThread.ManagedThreadId, ++x);
return x;
},
number);
}
// The example displays the similar output:
// Started RemoteIncrement(0)
// Started RemoteIncrement(...(RemoteIncrement(RemoteIncrement(4))...)
// Thread=4, Next=1
// Finished RemoteIncrement(0)
// Thread=5, Next=5
// Thread=6, Next=6
// Thread=6, Next=7
// Thread=6, Next=8
// Finished RemoteIncrement(...(RemoteIncrement(RemoteIncrement(4))...)sample · vbdocs/standard/parallel-programming/snippets/vb/unwrap.vb
Imports System.Threading
Module UnwrapExample
Sub Main()
Dim taskOne As Task(Of Integer) = RemoteIncrement(0)
Console.WriteLine("Started RemoteIncrement(0)")
Dim taskTwo As Task(Of Integer) = RemoteIncrement(4).
ContinueWith(Function(t) RemoteIncrement(t.Result)).
Unwrap().ContinueWith(Function(t) RemoteIncrement(t.Result)).
Unwrap().ContinueWith(Function(t) RemoteIncrement(t.Result)).
Unwrap()
Console.WriteLine("Started RemoteIncrement(...(RemoteIncrement(RemoteIncrement(4))...)")
Try
taskOne.Wait()
Console.WriteLine("Finished RemoteIncrement(0)")
taskTwo.Wait()
Console.WriteLine("Finished RemoteIncrement(...(RemoteIncrement(RemoteIncrement(4))...)")
Catch e As AggregateException
Console.WriteLine($"A task has thrown the following (unexpected) exception:{vbLf}{e}")
End Try
End Sub
Function RemoteIncrement(ByVal number As Integer) As Task(Of Integer)
Return Task(Of Integer).Factory.StartNew(
Function(obj)
Thread.Sleep(1000)
Dim x As Integer = CInt(obj)
Console.WriteLine("Thread={0}, Next={1}", Thread.CurrentThread.ManagedThreadId, Interlocked.Increment(x))
Return x
End Function, number)
End Function
End Module
' The example displays the similar output:
' Started RemoteIncrement(0)
' Started RemoteIncrement(...(RemoteIncrement(RemoteIncrement(4))...)
' Thread=4, Next=1
' Finished RemoteIncrement(0)
' Thread=5, Next=5
' Thread=6, Next=6
' Thread=6, Next=7
' Thread=6, Next=8
' Finished RemoteIncrement(...(RemoteIncrement(RemoteIncrement(4))...)For more information on using System.Threading.Tasks.TaskExtensions.Unwrap, see How to: Unwrap a nested Task.
Handle exceptions thrown from continuations
An antecedent-continuation relationship isn't a parent-child relationship. Exceptions thrown by continuations aren't propagated to the antecedent. Therefore, handle exceptions thrown by continuations as you would handle them in any other task, as follows:
- You can use the System.Threading.Tasks.Task.Wait, System.Threading.Tasks.Task.WaitAll, or System.Threading.Tasks.Task.WaitAny method, or its generic counterpart, to wait on the continuation. You can wait for an antecedent and its continuations in the same
trystatement, as shown in the following example:
sample · csharpdocs/standard/parallel-programming/snippets/cs/exception1.cs
using System;
using System.Threading.Tasks;
public class ExceptionExample
{
public static async Task Main()
{
Task<int> task = Task.Run(
() =>
{
Console.WriteLine($"Executing task {Task.CurrentId}");
return 54;
});
var continuation = task.ContinueWith(
antecedent =>
{
Console.WriteLine($"Executing continuation task {Task.CurrentId}");
Console.WriteLine($"Value from antecedent: {antecedent.Result}");
throw new InvalidOperationException();
});
try
{
await task;
await continuation;
}
catch (Exception ex)
{
Console.WriteLine(ex.Message);
}
}
}
// The example displays the similar output:
// Executing task 1
// Executing continuation task 2
// Value from antecedent: 54
// Operation is not valid due to the current state of the object.sample · vbsamples/snippets/visualbasic/VS_Snippets_Misc/tpl_continuations/vb/exception1.vb6
' Visual Basic .NET Document
Option Strict On
Option Infer On
' <Snippet6>
Imports System.Threading.Tasks
Module Example
Public Sub Main()
Dim task1 = Task(Of Integer).Run(Function()
Console.WriteLine("Executing task {0}",
Task.CurrentId)
Return 54
End Function)
Dim continuation = task1.ContinueWith(Sub(antecedent)
Console.WriteLine("Executing continuation task {0}",
Task.CurrentId)
Console.WriteLine("Value from antecedent: {0}",
antecedent.Result)
Throw New InvalidOperationException()
End Sub)
Try
task1.Wait()
continuation.Wait()
Catch ae As AggregateException
For Each ex In ae.InnerExceptions
Console.WriteLine(ex.Message)
Next
End Try
End Sub
End Module
' The example displays the following output:
' Executing task 1
' Executing continuation task 2
' Value from antecedent: 54
' Operation is not valid due to the current state of the object.
' </Snippet6>- You can use a second continuation to observe the System.Threading.Tasks.Task.Exception property of the first continuation. In the following example, a task attempts to read from a non-existent file. The continuation then displays information about the exception in the antecedent task.
sample · csharpdocs/standard/parallel-programming/snippets/cs/exception2.csexample
// <example>
using System;
using System.IO;
using System.Linq;
using System.Threading.Tasks;
public class ExceptionTwoExample
{
public static async Task Main()
{
var task = Task.Run(
() =>
{
string fileText = File.ReadAllText(@"C:\NonexistentFile.txt");
return fileText;
});
Task continuation = task.ContinueWith(
antecedent =>
{
var fileNotFound =
antecedent.Exception
?.InnerExceptions
?.FirstOrDefault(e => e is FileNotFoundException) as FileNotFoundException;
if (fileNotFound != null)
{
Console.WriteLine(fileNotFound.Message);
}
}, TaskContinuationOptions.OnlyOnFaulted);
await continuation;
Console.ReadLine();
}
}
// The example displays the following output:
// Could not find file 'C:\NonexistentFile.txt'.
// </example>
public class Example2
{
public static void ShowTaskException()
{
var task = Task.Run(
() =>
{
string fileText = File.ReadAllText(@"C:\NonexistentFile.txt");
return fileText;
});
Task continuation = task.ContinueWith(
antecedent =>
{
// <exception>
var fileNotFound =
antecedent.Exception
?.InnerExceptions
?.FirstOrDefault(e => e is FileNotFoundException) as FileNotFoundException;
if (fileNotFound != null)
{
Console.WriteLine(fileNotFound.Message);
}
// </exception>
}, TaskContinuationOptions.OnlyOnFaulted);
}
}sample · vbsamples/snippets/visualbasic/VS_Snippets_Misc/tpl_continuations/vb/exception2.vb4
' Visual Basic .NET Document
Option Strict On
Option Infer On
' <Snippet4>
Imports System.IO
Imports System.Threading.Tasks
Module Example
Public Sub Main()
Dim t = Task.Run(Function()
Dim s As String = File.ReadAllText("C:\NonexistentFile.txt")
Return s
End Function)
Dim c = t.ContinueWith(Sub(antecedent)
' Get the antecedent's exception information.
For Each ex In antecedent.Exception.InnerExceptions
If TypeOf ex Is FileNotFoundException
Console.WriteLine(ex.Message)
End If
Next
End Sub, TaskContinuationOptions.OnlyOnFaulted)
c.Wait()
End Sub
End Module
' The example displays the following output:
' Could not find file 'C:\NonexistentFile.txt'.
' </Snippet4>
Module Example2
Public Sub ShowTaskException()
Dim t = Task.Run(Function()
Dim s As String = File.ReadAllText("C:\NonexistentFile.txt")
Return s
End Function)
Dim c = t.ContinueWith(Sub(antecedent)
' <Snippet11>
' Determine whether an exception occurred.
If antecedent.Exception IsNot Nothing Then
' Get the antecedent's exception information.
For Each ex In antecedent.Exception.InnerExceptions
If TypeOf ex Is FileNotFoundException
Console.WriteLine(ex.Message)
End If
Next
End If
' </Snippet11>
End Sub, TaskContinuationOptions.OnlyOnFaulted)
c.Wait()
End Sub
End ModuleBecause it was run with the System.Threading.Tasks.TaskContinuationOptions.OnlyOnFaulted option, the continuation executes only if an exception occurs in the antecedent. Therefore it can assume that the antecedent's System.Threading.Tasks.Task.Exception property isn't null. If the continuation executes whether or not an exception is thrown in the antecedent, it must check whether the antecedent's System.Threading.Tasks.Task.Exception property isn't null before attempting to handle the exception, as the following code fragment shows:
sample · csharpdocs/standard/parallel-programming/snippets/cs/exception2.csexception
// <example>
using System;
using System.IO;
using System.Linq;
using System.Threading.Tasks;
public class ExceptionTwoExample
{
public static async Task Main()
{
var task = Task.Run(
() =>
{
string fileText = File.ReadAllText(@"C:\NonexistentFile.txt");
return fileText;
});
Task continuation = task.ContinueWith(
antecedent =>
{
var fileNotFound =
antecedent.Exception
?.InnerExceptions
?.FirstOrDefault(e => e is FileNotFoundException) as FileNotFoundException;
if (fileNotFound != null)
{
Console.WriteLine(fileNotFound.Message);
}
}, TaskContinuationOptions.OnlyOnFaulted);
await continuation;
Console.ReadLine();
}
}
// The example displays the following output:
// Could not find file 'C:\NonexistentFile.txt'.
// </example>
public class Example2
{
public static void ShowTaskException()
{
var task = Task.Run(
() =>
{
string fileText = File.ReadAllText(@"C:\NonexistentFile.txt");
return fileText;
});
Task continuation = task.ContinueWith(
antecedent =>
{
// <exception>
var fileNotFound =
antecedent.Exception
?.InnerExceptions
?.FirstOrDefault(e => e is FileNotFoundException) as FileNotFoundException;
if (fileNotFound != null)
{
Console.WriteLine(fileNotFound.Message);
}
// </exception>
}, TaskContinuationOptions.OnlyOnFaulted);
}
}sample · vbsamples/snippets/visualbasic/VS_Snippets_Misc/tpl_continuations/vb/exception2.vb11
' Visual Basic .NET Document
Option Strict On
Option Infer On
' <Snippet4>
Imports System.IO
Imports System.Threading.Tasks
Module Example
Public Sub Main()
Dim t = Task.Run(Function()
Dim s As String = File.ReadAllText("C:\NonexistentFile.txt")
Return s
End Function)
Dim c = t.ContinueWith(Sub(antecedent)
' Get the antecedent's exception information.
For Each ex In antecedent.Exception.InnerExceptions
If TypeOf ex Is FileNotFoundException
Console.WriteLine(ex.Message)
End If
Next
End Sub, TaskContinuationOptions.OnlyOnFaulted)
c.Wait()
End Sub
End Module
' The example displays the following output:
' Could not find file 'C:\NonexistentFile.txt'.
' </Snippet4>
Module Example2
Public Sub ShowTaskException()
Dim t = Task.Run(Function()
Dim s As String = File.ReadAllText("C:\NonexistentFile.txt")
Return s
End Function)
Dim c = t.ContinueWith(Sub(antecedent)
' <Snippet11>
' Determine whether an exception occurred.
If antecedent.Exception IsNot Nothing Then
' Get the antecedent's exception information.
For Each ex In antecedent.Exception.InnerExceptions
If TypeOf ex Is FileNotFoundException
Console.WriteLine(ex.Message)
End If
Next
End If
' </Snippet11>
End Sub, TaskContinuationOptions.OnlyOnFaulted)
c.Wait()
End Sub
End ModuleFor more information, see Exception Handling.
- If the continuation is an attached child task that was created by using the System.Threading.Tasks.TaskContinuationOptions.AttachedToParent option, its exceptions will be propagated by the parent back to the calling thread, as is the case in any other attached child. For more information, see Attached and Detached Child Tasks.